Public COA audit
Triple Agonist
Audited September 5, 2026
Several fields check out, but we found issues worth reviewing before you rely on this document.
- Legitimacy
- 92
- Confidence
- 93%
- Panels
- 3/7
- Purity (printed)
- 99.8%
Scored high because the document is mostly consistent but carries soft concerns, limited panel coverage (3/7), and 1 soft concern. To improve: include identity, purity, and endotoxin at minimum.
Document details
Fields extracted from the certificate — not order or payment data.
- Batch / lot
- CR-3XAG15-2603-1
- Identity method
- FTIR (USP <197A>)
- Sample date
- 2026-04-02
- Issue date
- 2026-04-05
Original certificate
Embedded copy of the stored COA PDF or image. Download it for your records — PeptIQ’s audit is separate from the lab document itself.
7-panel checklist
Had data + good, had data + bad, reported without pass/fail, or missing. Missing lowers thoroughness — you decide whether that panel matters; PeptIQ’s score still factors coverage.
3 of 7 present · 3 passed · 0 failed · 0 reported · 4 missing
Missing is a thoroughness gap — not automatically bad. PeptIQ’s legitimacy score still weighs panel coverage; you can down-weight panels that don’t matter for your use case.
Identity
Tested · passed · core
Compound identity confirmed (e.g. HPLC, mass spec).
FTIR sample spectrum confirms the presence of Triple Agonist with addition of excipient(s)/fillers
Purity
Tested · passed · core
Reported purity percentage for the analyte.
99.8%
Heavy metals
Not on this certificate file
Lead, arsenic, cadmium, mercury, or similar limits.
No evidence on this file. Vendors sometimes publish separate purity and endotoxin reports for the same lot — check the brand page before treating this as “never tested.”
Microbial
Not on this certificate file
Bioburden / microbial limits testing.
No evidence on this file. Vendors sometimes publish separate purity and endotoxin reports for the same lot — check the brand page before treating this as “never tested.”
Endotoxin
Tested · passed · core
LAL or chromogenic endotoxin assay.
24.4 EU/vial (limit: 40 EU/vial)
Sterility
Not on this certificate file
Sterility testing where applicable.
No evidence on this file. Vendors sometimes publish separate purity and endotoxin reports for the same lot — check the brand page before treating this as “never tested.”
Residual solvent / water
Not on this certificate file
Residual solvents or water content limits.
No evidence on this file. Vendors sometimes publish separate purity and endotoxin reports for the same lot — check the brand page before treating this as “never tested.”
How to read this
Had data · good
Panel present with a pass (or clear acceptance).
Had data · bad
Panel present with a fail — a concrete quality signal.
Had data · unclear
Value reported without an explicit pass/fail mark.
Missing on this file
Not on this certificate file. Lowers file thoroughness; a sibling endotoxin/purity report for the same lot may still exist. PeptIQ’s score still factors coverage.
Findings
Evidence-linked observations from this audit.
High HPLC purity achieved
99.8% purity by HPLC (USP <621>) meets specification of ≥98%. This is normal for research-grade peptides.
FTIR identity confirmed
FTIR spectrum confirms presence of Triple Agonist with excipients/fillers, consistent with formulated peptide product.
Endotoxin testing performed
Separate endotoxin report (page 3, report IF-824-QSA-TR006-BTL26130-20) shows gel clot LAL test result of 24.4 EU/vial, passing the 40 EU/vial limit.
Potency within specification
HPLC potency assay shows 100.5-103.5% of labeled 15 mg content (specification: 90-110%), with triplicate measurements.
Dates are current and consistent
Sample tested 2026-04-02, report issued 2026-04-05; endotoxin tested 2026-04-08, report issued 2026-04-10. All dates are on or before today (2026-09-05) and logically sequenced.
Lab contact information provided
BTLabs, West Palm Beach FL, with phone, email, and website. QR code present for verification.
Professional multi-page report
Three-page report with FTIR and HPLC chromatograms, triplicate measurements, USP method references, and dual scientist signatures.
Limited panel scope
This COA covers identity, purity, potency, and endotoxin only. Heavy metals, microbial contamination, sterility, and residual solvents/water content not tested. The Testing Purpose section explicitly states it does not provide information on particulate matter or microbial contamination (page 1).
PeptIQ COA reports analyze document content and publicly verifiable lab signals. They are educational and not a guarantee of product quality, legality, or safety. Always consult a qualified professional before making health decisions. We never publish purchase prices, shipping details, or uploader identity.