Public COA audit
Tirzepatide
Audited July 29, 2026
Several fields check out, but we found issues worth reviewing before you rely on this document.
- Legitimacy
- 92
- Confidence
- 93%
- Panels
- 2/7
- Purity (printed)
- 99.7%
Document details
Fields extracted from the certificate — not order or payment data.
- Batch / lot
- WL-TR10-P00519
- Identity method
- FTIR (USP <197A>) and HPLC (USP <621>)
- Sample date
- 2026-06-08
- Issue date
- 2026-06-12
7-panel checklist
Had data + good, had data + bad, reported without pass/fail, or missing. Missing lowers thoroughness — you decide whether that panel matters; PeptIQ’s score still factors coverage.
2 of 7 present · 2 passed · 0 failed · 0 reported · 5 missing
Missing is a thoroughness gap — not automatically bad. PeptIQ’s legitimacy score still weighs panel coverage; you can down-weight panels that don’t matter for your use case.
Identity
Tested · passed · core
Compound identity confirmed (e.g. HPLC, mass spec).
FTIR sample spectrum confirms the presence of Tirzepatide with addition of excipient(s)/fillers
Purity
Tested · passed · core
Reported purity percentage for the analyte.
99.7%
Heavy metals
Not on this COA
Lead, arsenic, cadmium, mercury, or similar limits.
No evidence for this panel. That lowers thoroughness — whether it matters depends on what you care about.
Microbial
Not on this COA
Bioburden / microbial limits testing.
No evidence for this panel. That lowers thoroughness — whether it matters depends on what you care about.
Endotoxin
Not on this COA · core
LAL or chromogenic endotoxin assay.
No evidence for this panel. That lowers thoroughness — whether it matters depends on what you care about.
Sterility
Not on this COA
Sterility testing where applicable.
No evidence for this panel. That lowers thoroughness — whether it matters depends on what you care about.
Residual solvent / water
Not on this COA
Residual solvents or water content limits.
No evidence for this panel. That lowers thoroughness — whether it matters depends on what you care about.
How to read this
Had data · good
Panel present with a pass (or clear acceptance).
Had data · bad
Panel present with a fail — a concrete quality signal.
Had data · unclear
Value reported without an explicit pass/fail mark.
Missing
Not on this certificate. Lowers thoroughness; you decide if that panel matters for your use case. PeptIQ’s score still factors coverage.
Findings
Evidence-linked observations from this audit.
High HPLC purity achieved
99.7% purity by HPLC (USP <621>) exceeds the ≥98% specification. This is normal for research-grade peptides and not a red flag.
Identity confirmed by FTIR and HPLC
FTIR spectrum confirms Tirzepatide presence with excipients/fillers. HPLC chromatogram shows single dominant peak at 10.662 min retention time.
Potency within specification
10.5 mg measured (105.1% of labeled 10 mg), within the 90-110% specification range.
Batch and sample identification present
Lot number WL-TR10-P00519, BT Sample ID 005000040403812, Report # IF-824-QSA-TR006-BTL2718-11.
Testing lab identified with contact information
BTLabs, 5730 Corporate Way Suite 220, West Palm Beach, FL 33407. Phone: (561) 625-0133. Website: https://btlabtesting.com. Two scientists signed (Andrea Castro, AS and Verna Zheng, AS).
Limited testing scope
COA explicitly states it does not provide information on particulate matter, microbial contamination, or endotoxins. No heavy metals, sterility, or residual solvent testing reported. This is common for basic peptide identity/purity testing but limits comprehensive quality assessment.
Professional presentation with supporting data
Document includes FTIR spectrum, HPLC chromatogram, peptide-to-excipient ratio (1:4.3), visual description, and QR code. Formatting is consistent with professional laboratory reports.
PeptIQ COA reports analyze document content and publicly verifiable lab signals. They are educational and not a guarantee of product quality, legality, or safety. Always consult a qualified professional before making health decisions. We never publish purchase prices, shipping details, or uploader identity.