Public COA audit
Pinealon
Audited July 28, 2026
Several fields check out, but we found issues worth reviewing before you rely on this document.
- Legitimacy
- 92
- Confidence
- 93%
- Panels
- 3/7
- Purity (printed)
- 99.7%
Document details
Fields extracted from the certificate — not order or payment data.
- Batch / lot
- CR-PIN10-2603-1
- Identity method
- FTIR (USP <197A>)
- Sample date
- 2026-04-02
- Issue date
- 2026-04-05
7-panel checklist
Had data + good, had data + bad, reported without pass/fail, or missing. Missing lowers thoroughness — you decide whether that panel matters; PeptIQ’s score still factors coverage.
3 of 7 present · 3 passed · 0 failed · 0 reported · 4 missing
Missing is a thoroughness gap — not automatically bad. PeptIQ’s legitimacy score still weighs panel coverage; you can down-weight panels that don’t matter for your use case.
Identity
Tested · passed · core
Compound identity confirmed (e.g. HPLC, mass spec).
FTIR sample spectrum confirms the presence of Pinealon with addition of excipient(s)/fillers
Purity
Tested · passed · core
Reported purity percentage for the analyte.
99.7%
Heavy metals
Not on this COA
Lead, arsenic, cadmium, mercury, or similar limits.
No evidence for this panel. That lowers thoroughness — whether it matters depends on what you care about.
Microbial
Not on this COA
Bioburden / microbial limits testing.
No evidence for this panel. That lowers thoroughness — whether it matters depends on what you care about.
Endotoxin
Tested · passed · core
LAL or chromogenic endotoxin assay.
15.4 EU/vial (limit: 40 EU/vial)
Sterility
Not on this COA
Sterility testing where applicable.
No evidence for this panel. That lowers thoroughness — whether it matters depends on what you care about.
Residual solvent / water
Not on this COA
Residual solvents or water content limits.
No evidence for this panel. That lowers thoroughness — whether it matters depends on what you care about.
How to read this
Had data · good
Panel present with a pass (or clear acceptance).
Had data · bad
Panel present with a fail — a concrete quality signal.
Had data · unclear
Value reported without an explicit pass/fail mark.
Missing
Not on this certificate. Lowers thoroughness; you decide if that panel matters for your use case. PeptIQ’s score still factors coverage.
Findings
Evidence-linked observations from this audit.
High HPLC purity achieved
HPLC purity of 99.7% meets specification (≥98%) and is typical for research-grade peptides.
Identity confirmed by FTIR
FTIR spectrum confirms presence of Pinealon with excipients/fillers, consistent with formulated peptide product.
Potency within specification
HPLC potency assay shows 100.6-111.6% of labeled 10 mg, within 90-110% specification range.
Endotoxin testing passed
Bacterial endotoxin level of 15.4 EU/vial is well below the 40 EU/vial limit (separate report dated 4/10/2026).
Batch/lot number clearly stated
Lot number CR-PIN10-2603-1 is consistent across all pages and reports.
Testing dates are logical and recent
Sample tested 4/2/2026, report issued 4/5/2026; endotoxin test dated 4/8/2026 with report 4/10/2026. All dates are consistent and within normal turnaround times.
Lab information complete
BTLabs contact information, address (West Palm Beach, FL), phone, email, and website provided. QR code present for verification.
Professional formatting with supporting data
Report includes FTIR spectrum, HPLC chromatogram, triplicate measurements, and detailed methodology references (USP chapters). Dual scientist signatures present.
Limited scope of testing
Testing purpose explicitly states it does not provide information on particulate matter, microbial contamination beyond endotoxins. Heavy metals, sterility, and residual solvents not tested.
PeptIQ COA reports analyze document content and publicly verifiable lab signals. They are educational and not a guarantee of product quality, legality, or safety. Always consult a qualified professional before making health decisions. We never publish purchase prices, shipping details, or uploader identity.